Select or Cancel Unicode(UTF-16) Mode

This command starts or stops as specified by Unicode(UTF-16).

ASCII	ESC + n
Hexadecimal	1B 2B n
Decimal	27 43 n
Value of n	•0—not select (Normal code) •1—selected (Unicode(UTF-16))
Default	0

Note: In Unicode mode, characters are specified as follows.

ESC + 1 <nL> <nH> ESC + 0

<nL><nH> can range in value from 0 to 65535; however, the character that can be specified is limited to an existing character.