Host Configuration

Verify that the proper hardware has been installed in the host PC.

Windows XP

1.Open the Control Panel.

2.Select System.

3.Select Hardware.

4.Select the Device Manager tab.

5.In the Device Manager window, scroll through the list of installed hardware devices until you find an entry for Universal Serial Bus controllers.

Windows 7, 8, and 10

1.From the Windows search bar, type Computer Management, then select to open.

2.Select System Tools→Device Manager.

3.In the Device Manager window, scroll through the list of installed hardware devices until you find an entry for Universal Serial Bus controllers.

Note:  If this entry exists, your host computer is set up for USB operation. If this entry is not in the list, consult your computer documentation to see if USB must be enabled in the BIOS setup.