Communication Interface Modes
The Configuration Menu gives the user the option of setting the printer to use a USB communication.
RS–232C Interface settings [Standard Model]
If the user sets the printer to use an RS–232C serial interface, the Configuration Menu can be used to set the following RS–232C specific settings:
- Set a baud rate 115200, 57600, 38400, 19200, 9600 baud
- Set the number of data bits to seven or eight
- Set the number of stop bits to one or two
- Enable or disable parity
- Set the printer to ignore data errors or print a “?” upon encountering an error
The settings used will depend on the software the operator is using and the capabilities of the host computer.
Press the Paper Feed button to select the communications settings.
Series i
Series ii
USB Interface settings [Standard Model]
USB Interface setting can be changed by selecting USB Type in the Hardware menu.
Ethernet Interface settings [Option]
Press the Paper Feed button to select the communications settings.
Series i
Series ii
Series i
Series ii
Series i
Series ii
Series i
Series ii
Save Parameters
This function allows to save the selected communication settings or return to the communication settings to select additional options.
Press the Paper Feed button to select an option.
