Installing the Second Cash Drawer
The CX3 supports a 2-drawer configuration with a Dual Cash Drawer Cable. Connect this cable to the terminal or to a transaction printer cash drawer connector.
The following table provides two versions of the Dual Cash Drawer Cable.
| Cable | Description | Notes |
|---|---|---|
| 1432‑C516‑0009 | 24V Dual Cash Drawer Splitter | Required if using two 24V cash drawers |
| 1432-C517-0009 | 12V Cash Drawer Splitter for Single or Dual configuration | Required if using one or two 12V cash drawers (legacy Radiant). Cable allows software to see which drawer is open/closed. |
Caution
The two cables look very similar. Make sure you use the correct one. Connecting the wrong cable can cause system damage. To identify the cable part number, check the label attached to the cable.
