Sensormatic EAS Deactivator

Warning: Make sure that the Sensormatic Controller is powered OFF. Do NOT connect or disconnect the Sensormatic Cables or Antenna from the Sensormatic Controller when power is ON as this could damage the controller.

For Countertop Mount and Wall Mount installations, the Sensormatic Controller is mounted using customer supplied brackets. Make sure that the controller is well secured and that the cable connections cannot be easily disconnected from the controller.

For Pedestal Mount installation, the Sensormatic Backpack kit (7709-K740) is required to mount and secure the Sensormatic Controller.

Note:  Take note of the following:

This section provides procedures for Countertop Mount and Wall Mount installations only. For Pedestal Mount installation procedures, refer to the 7709-K740 Sensormatic Backpack Kit Instructions to install the Backpack and the Sensormatic device and cables.

The Sensormatic Antenna and Controller are supplied by the customer.