Free Standing Pedestal Mount Kiosk

Using recommended anchors, the kiosk must be bolted to the baseplate. The installation location must be prepared before installing the kiosk. The bolts and washers are included in the baseplate kit.

Note:   For more information on bolts and anchors specifications, refer to NCR SelfServ™ XK22 (2246) Site Preparation Guide (BCC5-0000-5390).

To install the NCR SelfServ™ XK22 (2246) Kiosk on a free standing pedestal mount, follow these steps:

1.Align the four mounting holes on the pedestal base with the four mounting holes on the baseplate.

2.Secure the pedestal to the baseplate using four M8x20 bolts with four washers.