Recommended Bolt Specifications

Note:  The recommended bolt specifications indicated in this section are for Bolted Pedestal Mount installation only. For Free Standing Pedestal Mount installation, the bolts are already included in the Baseplate Kit.

In Bolted Pedestal Mount installation, the kiosk pedestal is bolted to the floor and cannot be transferred from one location to another. This option requires drilling bolt holes on the floor.

Note:  The anchors are not shipped with the kiosk and must be obtained locally.

NCR recommends to use the following bolt specifications for NCR XK22 Kiosk Bolted Pedestal Mount:

•Removable Bolt Anchor

•Diameter — M10 (3/8 in.)

•Length — 57.15 mm (2.25 in.)

•Thread size — 7.94 mm (5/16 in.), 18 pitch

•Quantity — 4 pieces

•Steel Flat Washer

•Inside diameter — 10.31 mm (0.406 in.)

•Outside diameter — 22.225 mm (0.875 in.)

•Thickness — 1.09 to 1.45 mm (0.043 to 0.057 in.)

•Quantity — 4 pieces