Installing the Kiosk
The NCR SelfServ™ XK32 (2247) Kiosk must be secured in the installed location so that it cannot be moved.
The floor, ceiling, or wall must be prepared, mounting holes drilled, and anchors installed prior to the final siting of the kiosk. Bolts and anchors used to secure the kiosk are not supplied by NCR, they must be provided by the owning organisation.
For floor, ceiling, or wall details and bolts or anchors details refer to the NCR SelfServ™ XK32 (2247) Site Preparation (BCC5-0000-5377).
There are three different installation configurations for the XK32 kiosk, refer to the appropriate section for the installation procedure corresponding to your kiosk configuration:
•Floor Only Mounting Installation
•Floor to Ceiling Mounting Installation
Caution: Due to the weight of the NCR SelfServ XK32 kiosk, the following is required to install the kiosk:
•A minimum of two persons for Single–sided or Wall Mount kiosk configuration
•A minimum of three persons for Double–sided kiosk configuration
