Installing the Door Assembly

Caution:  Due to its weight, installing the Door Assembly requires at least two persons.

For Dual-Sided Kiosk configuration, there are two Door Assemblies that require to be installed to the Kiosk. Perform the procedure below on each side of the kiosk to install both door assemblies.

To install the Door Assembly, perform the following steps:

Caution:  Continue to support the Door Assembly while securing it to the kiosk.

1.Partially tighten two M6 screws to the Kiosk Main Frame.

2.Mount the Door Assembly to the main frame by hooking the two key hole slots on the door hinge to the two M6 screws on the main frame.

3.Secure the Door Assembly using four M6 screws.

4.Fully tighten the two partially installed M6 screws.