Hidden AC Power Cord and LAN Cable

1.Connect and route the AC Power Cord.

a.Connect the AC Power Cord to the Filter.

b.Using a cable tie, secure the cable to the adhesive cable tie mount on the Filter.

c. Insert the cable through the hole on the right-hand leg and route the cable downward.

2.Insert the Primary Terminal LAN Cable through the hole on the right-hand leg and route the cable downward.

3.For a dual-sided kiosk, insert the Secondary Terminal LAN Cable through the hole on the other leg and route the cable downward.

4.On the base plate, pull out the AC and LAN cables.

5.Connect the AC Power Cord to a power outlet and the LAN cable to a LAN port on the floor-mounted power and data box.

6.Mount and secure the front cover to the base plate with one screw on each side.

Caution:  Make sure that the center panel of the cover does not pinch the AC and LAN cables.

7.Mount and secure the rear cover to the base plate with one screw on each side.

Caution:  Make sure that the center panel of the cover does not pinch the AC and LAN cables.