Routing Cables

To route the Eagle Coin Acceptor cables in a Plastic BCR (BCR 206), follow these steps:

1.Connect the manifold cable from to the Coin Acceptor Chute Opto PCB, as shown in the image below.

Note:  Ensure to secure the cable to the reclosable clip.

2.Feed the Coin Acceptor Manifold cable through the hole in the cover.

3.Secure the main cover to the Bulk Coin Recycler chassis using six (6) captive screws.

4.Connect the three (3) cable connectors to the Coin Acceptor and Manifold.