Installing Coupon Chute and Proximity Sensor Assembly

To install the Coupon Chute Assembly, follow these steps:

1.Install the Proximity Sensor Assembly to the Chute Assembly using two (2) M3 screws, as shown in the image below.

2.Attach the Coupon Chute with Proximity Sensor Assembly to the back of the Core Door, by reusing four (4) hex nuts, as shown in the image below.

3.Attach the Coupon Bin Throat to the back of the Core Door by reusing two (2) screws, as shown in the image below.

4.Route the Proximity Sensor cable along the Core Door and then connect to the E-box, as shown in the image below.