Installing the Pocono E-Box

To install the Pocono E-Box, follow these steps:

1.Install the Cable Guide Bracket to the new E-Box with screws (2).

2.Plug the Power Cord and secure it with a Cable Clamp and nut.

3.Slide the new E-Box to the slot on the Core.

4.Install the E-Box Bracket to the E-Box.

5.Connect the Input DC Power Cable to Input Belt / Fan connector.

6.Connect all other cables that were disconnected.

7.Bundle the cables and secure them with cable ties to the Cable Guide.

8.Position the E-Box to its working position.

9.Re-insert the Scanner Assembly.

10.Re-insert the Scanner Top Plate.

11.Make sure that the cables are connected to their designated connectors.

12.Power on the E-Box.

13.Close the Core Hood Cover.