Installing Tri–Light/Lane Light Pole (Optional)

To install the Tri–Light/Lane Light pole, follow these steps:

1. Insert the Tri–Light/Lane Light cable extender through the Tri–Light/Lane Light pole.
   Tip

   To make routing the cable extender through the pole easier, first attach a weight (for example, a large bolt) to a long piece of string and drop the weighted end of the string through the Tri-Light/Lane Light pole (starting at the top-end). Once the string is threaded through the pole, tie the non-weighted end of the string around the cable connector and then pull the cable extender through the pole.

2. Carefully insert the pole into the Upper Cabinet.

   

3. Secure the pole to the Upper Cabinet using two screws.

   

4. Install the Tri–Light/Lane Light assembly.