Removing the Electronic Lock Battery
If the Combination Lock LED flashes and beeps repeatedly when the door is open, the battery is low and needs to be replaced. It is recommended to replace the battery at least once per year.
Note
This procedure assumes that the battery is depleted and the lock cannot be opened.
To remove the battery, follow these steps:
- At the bottom of the keypad, remove the black plastic battery compartment cover by gently pulling downward on its handle.
- Allow the battery and its attached leads to drop down and out of the battery compartment. If the battery does not drop, gently pull on the battery until it drops out.
- Unsnap the battery terminals from the battery clip.
