Installing the Cylindrical Tri-Light Assembly

To install the Cylindrical Tri-Light Assembly, follow these steps:

1. Connect the Cylindrical Tri-Light Assembly cable with the cable extender in the pole.
   Note

   The Cylindrical Tri-Light assembly cable with either a white or black cable extender.

   

2. Insert the Cylindrical Tri-Light Assembly into the Tri-Light/Lane Light pole. Ensure that the pole holes are aligned.

   

3. Secure the Cylindrical Tri-Light Assembly to the pole with a screw.

   

4. Run the ADD utility to ensure device is updated with the latest firmware.