Installing the 7895 Scanner/Scale Top Plate

Depending on the type of 7895 Scanner, refer to either of the following procedures to install the Top Plate:

7895 Scanner/Scale
Note If necessary, remove the Scanner/Scale from the unit and adjust the leveling feet.
  1. Hold the front edge and the top of the Top Plate while slightly tilting the Top Plate and then position the Top Plate on top of the scanner base.
  2. Slide the Top Plate onto the scanner base until the hooks on the bottom of the Top Plate are positioned under the tabs on the scale.

  1. Lower the front edge of the Top Plate until the Top Plate sits securely on the scanner base.

7895 Scanner (non-scale)

Hold the front edge and the top of the Top Plate, and then lower the Top Plate onto the Scanner until it sits on the tabs of the metal frame.