Configuring the Camera Settings (Axis)

To configure the camera settings, follow these steps:

1. Connect the STP Ethernet Cable from the Tri-Light IP Camera Port to a POE Switch.
2. Connect another LAN cable from the host to same POE Switch.
3. Access the camera view by doing the following:
   1. Enter the IP Address of the network camera in the address bar and press Enter to access the login interface. The default IP address is 192.168.0.90.
      Note

      The host PC must have the same network ID with the camera device.

   2. Enter the following default login credentials:

      Username: root

      Password: admin@123

      

4. If the camera is accessed for the first time, set the password of the root account by doing the following:
   1. Enter the password admin@123.
   2. Retype the password.
   3. Click Create login.

   The browser opens a live feed of the camera.

5. Adjust the view of the camera to ensure that the following conditions are met:
   1. Customer's normal reach to Input and Bagwell areas are visible.
   2. Customer area is visible.
   3. Cart area is visible.
   Note

   The image shows an example of an ideal camera view. For the purpose of illustration only, the image below shows a Right-hand (RH) unit. For more information on setting the camera parameters, refer to Axis P12 Series User Manual.

   Fixed and Convertible

   

   Card Only

   

   7357 R6LN Plus

   

   7358 R6L Plus