Unpacking the GSR50 Recycler Module

To unpack, follow these steps:

1. Verify that all kit components are available. For more information, refer to Kit Contents.
2. Remove the blue plastic wrap from unit.
3. Remove and discard the following materials:
   • Desiccant bag taped on the recycler frame.
   • Packaging materials (cardboard and tapes) attached to the recycler stacker.
4. Remove the small plastic bag taped on the frame.
5. Verify that the following items are available inside the small plastic bag:
   Note

   These items will be used in attaching the new module to an existing one.

   • Two (2) screws
   • Two (2) cables
6. Set up the module assembly by fully inserting the recycler stacker into the recycler module.