Removing Existing PIN Pad Mount

Depending on the R6-C unit, refer to the following:

Full Recycling (Fixed/Convertible) Unit

To remove the existing PIN Pad Mount, follow these steps:

  1. Remove the Allen key securing the PIN Pad Mount to the PIN Pad Arm.

  2. Remove the PIN Pad Mount from the PIN Pad Arm, as shown in the images below.

Card Only Unit

To remove the existing PIN Pad Mount, follow these steps:

  1. Remove the Allen key securing the PIN Pad Mount to the PIN Pad Arm.

  2. Remove the PIN Pad Mount from the PIN Pad Arm, as shown in the images below.