Installation Procedure

To install the Narrow Power Pole Cover (WM Medium Gray) to a Modular Bagwell, follow these steps:

Note

For illustration purposes only, this procedure shows images using a 1-Bag Modular Bagwell.

  1. If necessary, remove the Hole Plug Cover on the side of the Bagwell.

  2. Using a hand drill, secure the Narrow Power Pole Cover Mount on the side of the Bagwell with four (4) self-drilling screws.

  3. Do the following:
    1. Route the Power Cable from the Core Cabinet and into the Bagwell.
    2. Pass the cable through the Bagwell access hole and plug it into the socket.

    3. Attach the Narrow Power Pole Cover to the Narrow Power Pole Cover Mount by aligning the pins to the slotted cutouts and sliding it down.