Standard Unit

To route the Coupon Printer LAN and Power cables in a Standard unit, follow these steps:

Note

Use cable ties to secure the cables on corresponding lance bridges.

  1. From the Bagwell, do the following:
  • Route the Coupon Printer Power Supply cable out of the unit through the cable exit at the base of the Bagwell.
  • Route the Coupon Printer LAN and Power cables through the side cable access hole. Depending on the orientation of the unit, refer to the images below.

  • From the side cable access hole, route the cables along the side wall up through corner cable access hole along the floor of the Scanner/Scale bucket and into the pole duct. Depending on the orientation of the unit, refer to the images below.