Installing Coin Overflow Bin

To install the Coin Overflow Bin, follow these steps:

1.Remove the existing Coin Recycler (Glory CI-10C). For more information, refer to Removing Coin Recycler (Glory CI-10C).

2.Do the following:

a.Secure the Coin Overflow Bin Chute on the side of the Coin Recycler tray using two M4 x 8 screws.

b.Secure the Coin Overflow Bin under the Coin Recycler tray using six M4 x 10 screws.

3.Pass the Coin Overflow Bin cable through the hole of the Coin Recycler tray as shown in the image below.

4.Re-install the Coin Recycler (Glory CI-10C) on the Coin Recycler tray and secure it with four screws.

5.Remove three screws from the side of the Coin Recycler (Glory CI-10C) to open the side cover as shown in the image below.

6.Connect the Coin Overflow Bin cable to the Coin Recycler (Glory CI-10C) connector as shown in the image below.

7.Secure the side cover of the Coin Recycler (Glory CI-10C) using three screws.

8.Connect the power and communication cables to the back of the Coin Recycler (Glory CI-10C).

9.Push the Coin Recycler (Glory CI-10C) back into the Core Cabinet.

10.Close and lock the Core Door.