Removing the Bagwell Panel (Fascia End)

To remove the Fascia End Panel from the Bagwell Frame, follow these steps:

Note

This procedure uses images of the Bagwell only for reference.

  1. Remove four (4) screws from inside the Bagwell to detach the Fascia End Panel, as shown in the image below.
    Important

    Use a 10 mm socket to remove these screws.

    Note

    The Fascia End Panel of the Bagwell must be removed after removing the Front and Back Panels of the Bagwell.

  1. Pull the Fascia End Panel from the Bagwell Frame.