Removing the Universal PIN Pad Plate

To remove the Universal PIN Pad Plate, follow these steps:

1. Turn off the Common Product Name software and hardware systems.
2. Disconnect the PIN Pad device cable.
3. Remove the PIN Pad device from the PIN Pad Plate.
   Note

   The customer supplied PIN Pad device may come with a PIN Pad Mount Adapter. For more information on removing the PIN Pad device, refer to its Instruction Manual.

4. Remove two (2) M4 pan head screws to detach the PIN Pad Plate from the PIN Pad Mount, as shown in the image below.

   

5. Slide back the PIN Pad Mounting Plate to disengage the locator pins from the bottom hooks of the PIN Pad Mount, as shown in the image below.