Installing the PIN Pad Arm Extender on Card Only Self-Checkout (7372) Configuration

To install the PIN Pad Arm Extender, refer to either of the following:

  1. Do the following, if necessary:
    1. Remove the PIN Pad device.
    2. Remove the PIN Pad Mount.
    Note

    Depending on the type of PIN Pad device and PIN Pad mount used in the SelfServ Checkout unit, refer to the 7372 Kit Repository for more information on removing or installing the specific PIN Pad device and mount.

  2. Mount the PIN Pad Arm Extender onto the PIN Pad Arm and secure using two (2) screws, as shown in the image below.

  3. Do the following:
    1. Install the PIN Pad Mount.
    2. Install the PIN Pad device.
    Note

    Depending on the type of PIN Pad device and PIN Pad mount used in the SelfServ Checkout unit, refer to the 7372 Kit Repository Site for more information on removing or installing the specific PIN Pad device and mount.