Ordering Forms

The 7168 Series II prints on single- or multiple-part forms in the slip station (up to five-part forms). Forms and slips must meet the following requirements:

•Front insertion (minimum):

51 mm (2.0 in.) wide

70 mm (2.75 in.) long

•Side insertion (minimum):

203 mm (8.0 in.) wide

51 mm (2.0 in.) long

•Single-ply forms should be on paper that is greater than 15 pounds

•Multiple-part forms (up to five parts) should be no thicker than 0.406 mm (0.016 in.)

•If multi-part formare used the cardstock must be the last ply of the form.

To order forms, contact your sales representative or order from Iconex at the following address or toll free number:

Iconex
Media Products Division
Voice: 1(800)543-8130 (toll free), or local listing of Media Products sales office.