SNMP Setting
This section discusses configuration parameters and default values for the SNMP setting.
SNMP Community setting
| Items | Default value | Detail |
|---|---|---|
| Read Only | public | Show SNMP community read only name. Maximum length is 16 characters. |
| Read/Write | Set SNMP community read-write name. Maximum length is 16 characters. |
SNMP IP Trap1 setting
| Items | Default value | Detail |
|---|---|---|
| TRAP | Disable | Select whether SNMP TRAP is “Enable” or “Disable”. |
| Address | 0.0.0.0 | Set address of host that receives SNMP TRAP. |
| Community Name | Set SNMP TRAP community name. Maximum length is 16 characters. |
SNMP IP Trap2 setting
| Items | Default value | Detail |
|---|---|---|
| TRAP | Disable | Select whether SNMP TRAP is “Enable” or “Disable”. |
| Address | 0.0.0.0 | Set address of host that receives SNMP TRAP. |
| Community Name | Set SNMP TRAP community name. Maximum length is 16 characters. |
