SBCS2, SBCS3 Font Support
There is the functionality to print the different size of SBCS font named SBCS2, SBCS3 for ESC/POS emulation.
To activate this functionality, SBCS2/SBCS3 font set has to be registered as the printer resident font. In addition to this, the printer has to be configured to SBCS2/SBCS3 font mode in Special Font setting. If SBCS2/SBCS3 font set are not registered in SBCS font data, SBCS2/SBCS3 font mode cannot be configured in Special Font setting.
Font cell size height is different between Font A and Font B in SBCS2, but it is the same in SBCS3.
Note
48 Character Mode is not available when SBCS2, SBCS3 font is selected.
SBCS1 Font Size
| Font Cell Size | Printable Area | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Dots | mm | CPL | Dots | mm | ||||||
| W | H | W | H | 80mm | 58mm | 80mm | 58mm | 80mm | 58mm | |
| SBCS Font A | 13 | 24 | 1.63 | 3.00 | 44 | 32 | 572 | 416 | 71.57 | 52.05 |
| SBCS Font B | 10 | 24 | 1.25 | 3.00 | 56 | 42 | 560 | 420 | 70.07 | 52.55 |
SBCS2 Font Size
| Font Cell Size | Printable Area | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Dots | mm | CPL | Dots | mm | ||||||
| W | H | W | H | 80mm | 58mm | 80mm | 58mm | 80mm | 58mm | |
| SBCS2 Font A | 13 | 28 | 1.63 | 3.50 | 42 | 30 | 546 | 390 | 68.32 | 48.80 |
| SBCS2 Font B | 10 | 20 | 1.25 | 2.50 | 56 | 40 | 560 | 400 | 70.07 | 50.05 |
SBCS3 Font Size
| Font Cell Size | Printable Area | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Dots | mm | CPL | Dots | mm | ||||||
| W | H | W | H | 80mm | 58mm | 80mm | 58mm | 80mm | 58mm | |
| SBCS3 Font A | 13 | 28 | 1.63 | 3.50 | 42 | 30 | 546 | 390 | 68.32 | 48.80 |
| SBCS3 Font B | 10 | 28 | 1.25 | 3.50 | 56 | 40 | 560 | 400 | 70.07 | 50.05 |
