USB Interface

This chapter includes programming bar codes for the USB host interface. The NCR 7895 connects directly to a USB host. Depending on the installation setup, an additional power supply may be required. Only a USB Power Plus host can power the NCR 7895 using a specified Power Plus cable, without an external power supply.

For USB host parameters default settings, refer to USB Interface Host Parameters. To change the default settings, do any of the following:

• Scan the appropriate bar codes in this chapter. The new value replaces the standard default value in memory.
• Configure the scanner using the 123Scan configuration program. For more information, refer to 123Scan and Software Tools.