Requirements

The following are required to configure the NCR 7895 with NCR CDC interface:

• NCR 7895 Scanner Firmware Plug-in (CAAFMS00-004-R00 or newer)
• 123Scan Configuration Utility
  Note

  It is recommended to install the latest version (v5.04.0006 or higher, 64‑bit) of the 123Scan utility. For more information on 123Scan, refer to Installing NCR 123Scan.

• Programming bar codes
  • NCR 7895 Scanner/Scale Bar Code Programming Guide (BCC5-0000-5516) at https://onlinehelp.ncrvoyix.com/Retail/Scanners/7895/HTML/Default.htm
• Zebra USB CDC Driver
  • Supported operating systems:
    • Windows 7 (32‑bit and 64‑bit)
    • Windows 8.1 (64-bit)
    Note

    The Windows 10 native CDC driver included in the Windows 10 operating system supports Zebra scanners and should be used to provide CDC functionality in the Windows 10 environment. For version other than Windows 10, the latest USB CDC Driver (v2.15.6000) needs to be installed from https://www.zebra.com/us/en/support-downloads/software/drivers/usb-cdc-driver.html.

• USB communication cable to connect the scanner to a Windows host computer