Using Wedge Communication Interface
The following are requirements to support the Wedge communication option:
- ROHS 7892 model (Manufactured in China)
- ROHS 7883 model (Manufactured in China)
- ROHS 7884 model (Manufactured in China)
- ROHS 7874 model (Manufactured in China)
- ROHS 7878 model (Manufactured in China)
- ROHS 7812 model (Manufactured in China)
- ROHS 7879 model (Manufactured in China)
- ROHS 7877 model (Manufactured in China)
- For 7892 Wedge Cable : 497–0440393 (1432–C679-0040)
- For 7893 Wedge Cable : 497–0420781 (1416–C676-0030)
- For 7883 and 7884 Wedge Cable : 497-0420781 (1416–C676–0030)
- For 7874, 7878, 7812, and 7879 Wedge Cable: 497-0445079 (1432-C158-0040)
- Jumpers set to Wedge—refer to 7883 Strapping Guide section for the 7883 scanner, and 7892 Strapping Guide section for the 7892 scanner.
- Terminal:
- PS2 Keyboard support (not applicable for 7878 and 7812)
- Windows XP, XPE, WEPOS, 7
- Firmware level Wedge is supported:
- 7892 and 7883—497–0449220 or later
- 7884—497–0459424 or later
- 7893—497–0464370 or later
- 7874—497–0502963 or later
- 7878—497–0477547 or later
- 7812—497–0477890 or later
- 7879—497–0503946 or later
- 7877—497–0513324 or later
