Configuring AMT

Configuring the Terminal

Note:  Depending on the processor chip set installed in the Terminal, the Terminal Configuration screens might differ slightly from the examples provided.

1.Boot the terminal.

2.When you see the NCR logo select [Del] several times to start the BIOS Setup Utility.

Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
Main , Advanced . ChipsetBoot . Security . Save & Exit
NCR BIOS Version   BIOS Vendor Core Version Compliancy Project Version Access Level   SMBIOS Information Manufacturer Product Name Version Serial Number   Processor Information Name Brand String   Frequency Processor ID Stepping Number of Processors Microcode Revision GT Info   IGFX VBIOS Version Memory RC Version Total Memory Memory Frequency   PCH Information Name PCH SKU Stepping LAN PHY Revision   ME FW Version ME Firmware SKU   2.0.4.X   American Megatrends 5.XX UEFI 2.4; PI 1.3 OACCM 0.04 x64 Administrator     NCR Corporation 7607-1000-8801   54-12345671     Skylake DT Intel(R) Core(TM) i3-6100TE CPU @ 2.70GHz 2700 MHz 506E3 R0/S0 2Core(s) / 4Threads(s) 6A GT2   1033 1.6.0.1 8192 MB 2133 MHz     SKL PCH-H PCH-H Desktop Q170 SKU 31/D1 B2   11.0.0.1197 Corporate SKU	Choose the system default language                       ___________________ →←: Select Screen ↑↓/Click: Select Item Enter/Dbl Click: Select +-: Change Opt. F1: General Help F2: Previous Values F9: Load Defaults F10: Save and Exit ESC/Right Click: Exit

3.Under the Advanced tab, select AMT Configuration and select [Enter].

Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
Main , Advanced Chipset Boot . Security . Save & Exit
► ACPI Settings ► SS RTC Settings ► Trusted Computing ► NCR POS ► CPU Configuration ► SATA Configuration ► AMT Configuration ► Info Report Configuration ► HDD S.M.A.R.T. Status ► USB Configuration ► SMART Settings ► Super IO Configuration ► H/W Monitor ► Serial Port Console Redirection ► Network Stack   ► Intel(R) Ethernet Network Connection	AMT Parameters                     ___________________ →←: Select Screen ↑↓/Click: Select Item Enter/Dbl Click: Select +-: Change Opt. F1: General Help F2: Previous Values F9: Load Defaults F10: Save and Exit ESC/Right Click: Exit

4. Enable Intel AMT.

a.Highlight Intel AMT and select [Enter].

Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
Main . Advanced . Chipset . Boot . Security . Save & Exit
Intel AMT BIOS Hotkey Pressed MEBx Selection Screen Hide Un-Configure ME Confirmation MEBx Debug Message Output Un-Configure ME AMT Wait Timer Disable ME ASF Activate Remote Assistance Process USB Configure PET Progress AMT CIRA Timeout Watchdog . OS Timer . BIOS Timer     [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] 0 [No] [Enabled] [Disabled] [Ensable] [Enabled] 0 [Disabled] 0 0	OEMFlag Bit 1: Enable/Disable BIOS hotkey press.                   ___________________ →←: Select Screen ↑↓/Click: Select Item Enter/Dbl Click: Select +-: Change Opt. F1: General Help F2: Previous Values F9: Load Defaults F10: Save and Exit ESC/Right Click: Exit

b.Set to Enabled.

c.Select [Enter].

5.Enable BIOS Hotkey Pressed.

a.Hightlight BIOS Hotkey Pressed and select [Enter].

Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
MainAdvanced ChipsetBoot Security Save & Exit
Intel AMT BIOS Hotkey Pressed MEBx Selection Screen Hide Un-Configure ME Confirmation MEBx Debug Message Output Un-Configure ME AMT Wait Timer Disable ME ASF Activate Remote Assistance Process USB Configure PET Progress AMT CIRA Timeout Watchdog . OS Timer . BIOS Timer     [Enabled] [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] 0 [No] [Enabled] [Disabled] [Ensable] [Enabled] 0 [Disabled] 0 0	OEMFlag Bit 1: Enable/Disable BIOS hotkey press.                   ___________________ →←: Select Screen ↑↓/Click: Select Item Enter/Dbl Click: Select +-: Change Opt. F1: General Help F2: Previous Values F9: Load Defaults F10: Save and Exit ESC/Right Click: Exit

b.Select Enabled.

c.Select [Enter].

6.Select F10 and [Enter] to Save and Exit.

7.After the system reboots the Intel ® Management Engine BIOS Extension Main Menu is displayed.

8.Highlight MEBx Login and select [Enter].

9.Enter the [password] >> [Enter].

Intel (R) Management Engine BIOS Extension v11.0.0.0005/Intel(R) ME v11.0.0.1197Copyright (C) 2003-15 Intel Corporation. All Rights Reserved

MAIN MENU

. MEBx Login > Intel(R) ME General Settings > Intel(R) Standard Manageability Configuration . MEBx Exit

[[éê]=Move Highlight [ENTER]=Select Entry ESC]=Exit

Note:  The first time this program is run you must use the default password, admin (lower case).
[admin] >> [Enter]

At the prompt, enter the new password (write it down to remember). The password must contain upper, lower, symbol, & numeric characters.

Example:  Ncr@2016

You must enter the password a second time for verification.

10.Highlight Intel(R) Standard Manageability Configuration and select [Enter].

Intel (R) Management Engine BIOS Extension v11.0.0.0005/Intel(R) ME v11.0.0.1197Copyright (C) 2003-15 Intel Corporation. All Rights Reserved

MAIN MENU

. MEBx Login > Intel(R) ME General Settings > Intel(R) Standard Manageability Configuration . MEBx Exit

[[éê]=Move Highlight [ENTER]=Select Entry ESC]=Exit

11.Highlight Activate Network Access and select [Enter]

Intel (R) Management Engine BIOS Extension v11.0.0.0005/Intel(R) ME v11.0.0.1197Copyright (C) 2003-15 Intel Corporation. All Rights Reserved

INTEL (R) STANDARD MANAGEABILITY CONFIGURTION

. Manageability Feature Selection > SOL/IDER > User Consent . Password Policy > Network Setup . Activate Network Access . Unconfigure Network Access > Remote Setup and Configuration > Power Control           <Enabled>   <Anytime>   <Full Unprovision>

[[éê]=Move Highlight [ENTER]=Select Entry ESC]=Exit

12.Select Y for Yes to activate the network interface.

13.Select [ESC] >> [ESC]>>Y to exit the Intel ® Management BIOS Extension and reboot the system.

14.The terminal should now be accessible using its IP address.

Note:  The BIOS Hotkey Pressed setting is reset to Disabled automatically when you exit AMT.