NCR X-Series Displays (5968/5985)

The 5968/5985 Display connects to the host terminal using two cables.

• DisplayPort, HDMI, or VGA cable for video.

Note:  Additional audio cable is needed for integrated screen speakers if the VGA cable is implemented.

•Powered Universal Serial Bus (USB) for data and power.

Note:  An optional Power Brick is available when USB power is not available on the host terminal. A special USB cable is used for data in this case.

Video Cable Connections

DisplayPort (Video and optional Audio)

Connect the DisplayPort Cable to the DisplayPort connectors on both the display and host terminal.

Note:  Dual DisplayPort++ is only available with a XR8 Release 2.x only.

HDMI (Video and optional Audio, Release 1.x only)

The 5968/5985 Display can use a HDMI Cable for video.

Connect the HDMI cable to the HDMI connectors on the display and host terminal.

VGA

1.Connect the VGA Cable to the VGA connectors on both the display and host terminal.

2.Optional Audio Cable – Connect an Audio Cable to the Audio connectors on both the display and host terminal.

Data and Power Cable Connections

USB12V

The USB 12V Cable provides both USB and power to the display.

1.Connect the USB Power Cable to the display Power connector.

2.Connect the USB 12V Cable to 12V Powered USB Port C on the host terminal.

External Power Brick

A USB Power Cable is used to provide both USB and power to the display when the host terminal does not have a USB 12V port available, but does have an available standard USB port.

1.Connect the USB Power Cable to the display Power connector.

2.Connect the other end of the USB Power Cable to the USB connector on the host terminal.

3.Connect the Power Brick DC Cable to the USB Power Cable (middle of the cable).

4.Connect the AC Power Cord to the Power Brick and an AC outlet.