Restoring Factory Settings

To reset all values to their default settings for the current screen, press [F9] and then [Enter] when the confirmation message is displayed. The terminal automatically loads the BIOS default values. To reset all BIOS settings to their default settings go to the Exit menu, press F9, select either Save Changes & Exit or Save Changes, and press [Enter].

Note:  The 7611 Motherboard is used on other products and has a jumper that is used to select the proper BIOS defaults. If the Motherboard is replaced be sure this jumper is set to the RSD setting.

See the BIOS Default Settings sections later in this chapter for the pre-installed Setup defaults.