Advanced Menu
►Trusted Computing |
|
Security Device Support |
[Enabled] |
SHA-1 PCR Bank |
[Enabled] |
SHA256 PCR Bank |
[Disabled] |
Pending operation |
[None] |
Platform Hierarchy |
[Enabled] |
Storage Hierarchy |
[Enabled] |
Endorsement Hierarchy |
[Enabled] |
TPM2.0 UEFI Spec Version |
[TCG_2] |
Physical Presence Spec Version |
[1.2] |
Device Select |
[Auto] |
►NCR POS |
|
Hide Setup Items |
[Yes] |
Port CF9 Full Reset |
[Disabled] |
ACPI S5 Shutdown |
[Enabled] |
F8 BBS Boot Menu |
[Enabled] |
Video Delay in Seconds |
[5] |
WiFi Radio | [Enabled] |
Bluetooth Radio | [Enabled] |
Logo Display |
[Logo] |
►HDD S.M.A.R.T. Status Reporting |
|
SATA Port0 |
120GB SATA Fla (120.0GB) |
SMART Status |
Supported/OK |
SMART Port1 |
Not Present |
SMART Status |
N/A |
►ACPI Settings |
|
Enable ACPI Auto Configuration |
[Disabled] |
Enable Hibernation |
[Enabled] |
ACPI Sleep State |
[S3 only (Suspend to RAM] |
Lock Legacy Resources |
[Disabled] |
► SMART Settings |
|
SMART Self Test |
[Disabled] |
► IT8786 Super IO Configuration |
|
Super IO Chip |
IT8786 |
► Serial Port 1/A Configuration |
|
. Serial Port |
[Enabled] |
. Device Settings |
IO=3F8h; IRQ=4 |
. I/O Base Address |
[0x3F8] |
. IRQ |
[IRQ4] |
►H/W Monitor |
|
System Health Status | |
. Memory Module Temperature | +28°C |
. Power Supply Temperature | +37°C |
. System Ambient Temperature | +30°C |
System Fan Speed | N/A |
+VCC0 CPU |
+0.840V |
+1.35V S3 |
+1.344V |
+12V S0 |
+11.952V |
+5V S0 |
+4.950V |
+3.3V S5 |
+3.264V |
VBAT |
+2.976V |
►Serial Port Console Redirection |
|
Console Redirection |
[Disabled] |
►CPU Configuration |
|
Limit CPUID Maximum | [Disabled] |
Bi-directional PROCHOT | [Enabled] |
Intel Virtualization Technology | [Enabled] |
Power Technology | [Disabled] |
►SATA Configuration |
|
SATA Controller(s) |
[Enabled] |
SATA Mode Selection |
[ACHI] |
SATA Interface Speed | [Gen3] |
SATA Test Mode | [Disabled] |
Aggressive LPM Support | [Enabled] |
► Software Feature Mask Configuration | |
. HDD Unlock | {Enabled] |
. LED Locate | [Enabled] |
SATA PORT0: 120GB SATA Fla (120.0GB) | |
. Port 0 | [Enabled] |
. Spin Up Device | [Disabled] |
. Device Sleep Support | [Disabled] |
SATA Port1: Not Present | |
. Port 1 | [Enabled] |
. Spin Up Device | [Disabled] |
. Device Sleep Support | [Disabled] |
►Network Stack Configuration |
|
Network Stack |
[Disabled] |
►CSM Configuration |
|
CSM Support |
[Enabled] |
CSM16 Module Version |
07.79 |
GateA20 Active |
[Upon Request] |
Option ROM Messages |
[Force BIOS] |
INT19 Trap Response |
[Immediate] |
Boot Option Filter |
[UEFI and Legacy] |
► Option ROM Execution |
|
Network |
[Legacy] |
Storage |
[Legacy] |
Video |
[Legacy] |
Other PCI Devices |
[UEFI] |
► Info Report Configuration |
|
Summary Screen |
[Disabled] |
►USB Configuration |
|
Legacy USB Support |
[Enabled] |
XHCI Hand-off |
[Disbled] |
USB Mass Storage Driver Support |
[Enabled] |
► USB Hardware Delays and Time-Outs |
|
USB transfer time-out |
[20 sec] |
Device reset time-out |
[20 sec] |
Device power-up delay |
[Auto] |