Installing the Terminal

Introduction

The 7616 is fully assembled at the factory. This chapter discusses how to install a standalone terminal. For information about installing optional external peripheral devices see the Installing Optional Remote Peripherals chapter.

There are also several feature kit options that can be integrated in the terminal. For installation information about these please see the Kit Instructions for each. They can be downloaded from the Retail IP Web Sites:

•Internet: http://www.info.ncr.com

•NCR Intranet: http://inforetail.ncr.com

To locate the installation guides on these sites:

1.Select General Search.

2.Select the Kit Instructions icon.

3.In the Kit Title field, enter the Kit Title.

Example:   MSR

or

In the Kit Number field, enter the Kit Number.

Example:   7403-K454

4.Select Search

The file can be viewed online by left-mouse clicking on the pub title, or if you prefer to download the entire file you can right-mouse click on the title then select the Save Target as... option.

If you aren't sure of the title of number you can display all kits associated with a terminal product class by:

5.In the Class drop-down list, select the Class of the terminal.

Example:   7616

6.Select Search.

Installation Summary

•Remove the terminal from the shipping packaging and verify the hardware configuration.

•Connect the peripheral and communication cables.

•Attach the Power Cord to the system and to an AC power source.

•After power is applied to the terminal the Power-up self-tests run to verify basic functionality.

•ROM-based setup should be used to configure network options. Full configuration depends upon the system server and the management web site.

Installation Restrictions

"Before installing the terminal, read and follow the guidelines in the NCR RealPOS 72XRT Site Preparation Guide (B005 0000 2229) and the NCR Workstation and Peripheral AC Wiring Guide (BST0 2115 53).

•Install the terminal near an electrical outlet that is easily accessible. Use the power cord as a power-disconnect device.

•Do not permit any object to rest on the power cord. Do not locate the terminal where the power cord can be walked on.

•Use a grounding strap or touch a grounded metal object to discharge any static electricity from your body before servicing the terminal.

•If the power cord is replaced, it must be replaced with the same type of cord.

•Do not route the power cord through openings with sharp edges.

Warning: This unit contains hazardous voltages and should only be serviced by qualified service personnel.

Warning: DO NOT connect or disconnect the transaction printer while the terminal is connected to AC power. This can result in system or printer damage.

Warning: DO NOT connect or disconnect any serial peripherals while the terminal is connected to AC power. This can result in system or printer damage.