Activating Network Access

1. Select Intel(R) AMT Configuration and press [Enter].
2. Select SOL/IDER/KVM and press [Enter].
3. Set SOL, IDER and KVM Feature Selection to Enabled.
4. Set Legacy Redirection Mode to Disabled.
5. Press [Esc].
6. Select User Consent and press [Enter].
7. Set User Opt-in to NONE.
8. Set Opt-in Configurable from Remote IT to Disabled.
9. Press [Esc].
10. Select Activate Network Access and press [Enter].
11. Press [Y] to activate the network interface.
12. Press [Esc] >> [Esc] >> [Y] to exit the Intel ® Management BIOS Extension and reboot the system.
13. The motherboard should now be accessible using its IP address.