Installing the Cash Drawer
The Cash Drawer can be connected to the Cash Drawer connector on the Base.
Warning
Non-NCR Cash Drawers must contain a protective diode.
The table below shows the cable options.
| Cable | Description | Notes |
|---|---|---|
| 1432-C516-0009 | Dual Cash Drawer Splitter for 24V cash drawers | Required if using two 24V cash drawers on a CX7 USB Centric I/O. |
| 1432-C517-0009 | 12V Cash Drawer (RJ12) Adaptor for Single or Dual Cash Drawer | Required if using 12V cash drawers (legacy Radiant) on a CX7 USB Centric I/O. Cable allows software to see which drawer is open/close. |
| 1432-C828-0010 | CX7 Single Cash Drawer 6-pin to 4-pin (12V) Cable | Required if using 12V cash drawer on a CX7 USB Centric I/O or Serial Centric I/O . |
The table below shows the cable needed per configuration.
| Cash Drawer | Cable for USB Centric I/O | Cable for Serial Centric I/O |
|---|---|---|
| Single 12V Cash Drawer | 1432-C828-0010 | 1432-C828-0010 |
| Dual 12V Cash Drawer | 1432-C517-0009 | 1432-C828-0010 (Qty. 2) |
| Single 24V Cash Drawer | standard option on I/O | standard option on I/O |
| Dual 24V Cash Drawer | 1432-C516-0009 | standard option on I/O |
