Installing the RSM LE License

The license file must be installed at the highest RSM tier. When you install the license file at the highest tier, it is automatically distributed to the lowest tiers. Within the RSM user interface, the ability to upload license files and configure license settings is restricted to the highest tier of RSM. If RSM LE is managed by an RSM server, the license file must be applied at the highest server tier. If RSM LE is unmanaged, you can install an RSM license at RSM LE to use RSM LE licensed features.

To install an RSM LE license, perform the following:

1.Set the Customer Number.

2.Add the license file.

Setting the Customer Number

The Customer Number is unique for each RSM customer and is required to activate an RSM license.

Note:  If the RSM LE is managed, the Customer Number can only be configured at an RSM server and cannot be changed at the RSM LE tier.

To set the Customer Number at an unmanaged RSM LE, follow these steps:

1.In the RSM LE user interface, select AdministrationàRSM Services.

2.Select Customer Number and then enter your Customer Number.

3.Select Save to save the new Customer Number value.

Adding the License file

You can add the license file through the following:

•Through the RSM LE user interface (UI)

•Through manual copying

Note:  Only one customer license file may be present. If replacing the existing license file with a new one, delete the old customer license file.

Warning: Delete only the customer–specific license file. Do not delete the default.dat or cepriv.dat license files to avoid triggering an installation repair.

Adding an RSM LE license file through the UI

To add an RSM LE license file through the user interface, follow these steps:

1.In the RSM LE user interface, select AdministrationàLicensing.

2.Select Add and then browse for and select the license file.

3.Select Copy. If the file is successfully uploaded, a message appears accordingly.

Adding an RSM LE license file through manual copying

For RSM 4.0 and later releases, place the license file in the following path:

%ALLUSERSPROFILE%\NCR\RSM\Website\XML

The %ALLUSERSPROFILE% variable is an environment variable that points to different locations depending on the operating system.

Note:  For RSM releases earlier than 4.0, place the license file in the C:\Program Files\NCR\RSM\Website\XML directory.