Hardware Installation

Overview

The hardware installation of the NCR SelfServ™ XK22 (2246) Kiosk varies according to the kiosk configuration: Countertop Mount, Wall Mount, or Pedestal Mount.

This guide is intended for NCR personnel or NCR customer personnel who are qualified to install the kiosk.

Perform the following steps to install the NCR XK22 Kiosk:

1.Prepare the kiosk for installation. For more information, refer to Preparing the Kiosk for Installation.

2.Unpack and inspect the kiosk for damage. For more information, refer to Unpacking and Inspecting the Kiosk.

3.Install the kiosk based on its configuration. For more information, refer to Installing the Kiosk.

4.Install the payment device. For more information, refer to Installing Payment Devices.

5.Install the Electronic Article Surveillance (EAS) device. For more information, refer to Installing Electronic Article Surveillance (EAS) Devices.

Before starting with the installation, make sure to read the Installation Guidelines and Requirements and prepare the Required Tools.