Floor Only Mounting Installation

Floor mounting installation requires the kiosk to be bolted to the floor using four anchors. It is the responsibility of the owning institution to provide the anchors to secure the kiosk.

For floor bolt holes and anchor details, see Bolt Holes.

Installation Overview

1.Install the Floor Mount, see The Floor Mount requires to be bolted to the floor using four anchor bolts and nuts. It is the responsibility of the owning institution to provide the anchors to secure the kiosk..

2.Install the Main Frame, see Due to its weight, installing the Main Frame to the Leg Stand requires at least two persons..

3.Install the Top Poles, see Installing the Top Poles

4.Install the Signage, see Installing the Signage.

5.Install the Door Assembly, see Installing the Door Assembly.

6.Install the Display, see Installing the Display.

7.Install the Printer, see Installing the Printer.

8.If required, install the PIN Pad terminals, see Installing PIN Pad Terminals.

9.Route the Internal Cables, see Routing and Connecting Internal Cables.

10.Connect the External AC Power Cord and LAN Cable, see Routing the AC Power Cord and LAN Cable.

11.Verify if kiosk installation and cable routing are correct, see Verifying Kiosk Installation and Cable Routing.

12.Turn ON the kiosk, see Turning ON the Kiosk.

13.Load the printer with a Paper Roll, see Loading Printer Paper Roll.