Removing the Touch Display

Upgrading 7350 Narrow Core to the R6 Lite version replaces the Touch Display with the 7702 Display Terminal.

To remove the Touch Display from the 7350 Narrow Core unit, follow these steps:

1.Turn off the NCR SelfServ Checkout software and hardware systems.

2.Open the Core Door.

3.Remove the two screws securing the Display mount to the tower frame.

4.Slide up the Display to disengage the mount hooks from the core.

5.Lift and tilt the Display forward to disconnect the Display cables.

6.Remove the cables from the Core Door. For more information, refer to Removing and Sorting Cables.

7.Remove other 7350 Narrow Core components that must be replaced with R6 Lite Narrow Core components. For more information, refer to the Installation Procedures.

Note:  To remove the tower frame and the scanner/scale, refer to the 7350-K979 Upgrade, Narrow Core 7879e Kit Instructions.