Installation Procedures
To upgrade an existing 7350 SelfServ Checkout Narrow Core unit to 7350 R6 Lite Narrow Core, do the following :
1.Remove 7350 Narrow Core components. For more information, refer to the following procedures:
b.Removing the Tri-Light /Lane Light Assembly and Pole.
c.Removing the Supervisor Switch.
f.Removing and Sorting Cables.
2.Install R6 Lite Narrow Core components. For more information, refer to the following procedures:
Note: To upgrade the tower frame and the scanner/scale, refer to the 7350-K979 Upgrade, Narrow Core 7879e Kit Instructions.
a.Installing the 7360 Tri-Light/Lane Light Assembly (Optional).
b.Installing the Supervisor Switch.
c.Installing the Display Mounting Bracket.
d.Installing the NCR 7702 Terminal Display.
Note: To purchase an NCR 7702 Terminal Display, contact an NCR Customer Representative.
e.Installing the System Power Supply on Bracket
f.Installing the I/O Box on Bracket
g.Installing the I/O Box and Power Supply Bracket.
3.Attach the labels by doing of the following:
•Installing 7350 R6 Lite Product Identification (PID) Upgrade Label .
•Attach the cable labels on both ends of the cables.