Removing Tri–Light/Lane Light Pole

To remove the Tri–Light/Lane Light pole, follow these steps:

1. Remove the existing Tri–Light/Lane Light assembly, if necessary. For more information, refer to Removing Tri–Light/Lane Light Assembly.

2.Open the Tower Cabinet. For more information, refer to Opening the Tower Cabinet.

3.If necessary, remove the Receipt Printer to ensure access to the pole attachments. For more information, refer to NCR FastLane SelfServ™ Checkout (7358) R6L Plus Hardware Service Guide (BCC5-0000-5265).

4.Remove two (2) screws securing the pole to the unit.

5.Disconnect the Tri–Light/Lane Light cable from the I/O Box.

6.Carefully lift the pole out of the unit.