Dispensing Notes from each Recycler Drum to the Exit Slot
Now that the bills have been loaded to the recycler, try to dispense the notes from the Recycler. To dispense a note from each Recycler drum to the exit, follow these steps:
- From the Fujitsu GSR50 window, select Disable Acceptor.
- From the Dispense/Purge/Load drop-down list under Recycler, select how many notes per recycler to dispense then select Dispense. The Remove the Cash Box Verification window is displayed.
- Remove the Notebox (Cashbox) Module by moving the green latch to the left and then pulling the Notebox (Cashbox) Module from the chassis, as shown in the image below.
- In the Remove the Cash Box Verification window, Select OK to verify that the Notebox (Cashbox) Module has been removed. The Re-insert the Cash Box and lock the Cabinet window is displayed.
- Re-insert and then push the Notebox (Cashbox) Module into the corresponding frame until it snaps in place.
- On the Reinsert the CashBox and lock the Cabinet window, select OK to verify that the Notebox (Cashbox) has been inserted back to the GSR50 Note Recycler.
- Remove the notes from the Exit Slot of the Note Acceptor.
To purge the note from each Recycler drum to the Notebox (Cashbox), refer to Purging Notes from each Recycler Drum to the Notebox (Cashbox).