Removing Existing PIN Pad Arm

To remove the existing PIN pad Arm, follow these steps:

1. Remove the PIN pad Mount from the PIN pad Arm. For more information, refer to Removing Existing PIN Pad Mount .
2. Remove the back panel from the Tower frame by doing the following:
   1. Unlock the tower frame using a key.

      

   2. Raise the Terminal Display.

      

   3. Loosen the star–shaped washer around the keylock assembly by turning it counterclockwise.

      

   4. Remove the back panel from the tower assembly.

      

3. Remove the three (3) screws securing the PIN Pad Arm to the Tower Frame.