NCR 5977 Customer Displays

1.Locate the Display Mount within 4 meters (13 ft.) of the host terminal.

2.Determine if the cable should be routed down through the mounting surface or if it should be run on top of the surface. Drill a hole if necessary.

3.If you are installing with a post greater than 215 mm (8.5 in.), secure the Base Plate with screws (4) that are appropriate for the mounting surface.

4.Install the Post Mount, the Display Assembly, and the Interface Cable. Follow the procedures that correspond to the type of cable bracket used.

•For Cable Management Bracket, refer to Using Cable Management Bracket.

•For Strain Relief Bracket, refer to Using Strain Relief Bracket.