Green LED is Blinking
| Bezel LED | Cause | What to Do | Where to Go |
|---|---|---|---|
| 1 Blink, Pause 5 seconds | Warning for PCB | Contact a service representative if the warning continues. | Refer to Contacting a Service Representative. |
| 4 Blinks, Pause 5 seconds | Receipt paper is low | There are about 4.5 ± 3 meters, (15 ±10 feet) of paper left. Change the paper soon to avoid running out of paper part way through a transaction. Important
For proper Paper Low detection, set the Receipt Direction option to match the physical orientation of the printer with either Front Exit (default) or Top Exit. If using OPOS/JavaPOS, there is a Profile setting that controls this configuration. If not using OPOS/JavaPOS, configure it at the printer firmware. | Refer to Loading and Changing the Receipt Printer. |
