Programming Tags
The Programming Tags are used to set the NCR 7879 program parameters. There are 30 Programmings Tags; some are for specific functions such as Volume Adjustment, Firmware Flashing, and so forth. Following are the Programming Tags; click the tag name to display the Programming Tag. Click the tag name a second time to hide the Programming Tag.
Note: You must touch the Camera button at the bottom-right corner of the Vertical Scan window before scanning each Programming Tag.
Note: Other Topics are available at the end of this page.
Volume Adjustment
Reset
Default
Programming Mode
End
Save and Reset
Abort
Diagnostic Mode
Speak Scanner Serial Number
Speak Enabled Bar Codes
Mode 1
Mode 2
Reset Tallies
Firmware Flashing
Hex 0
Hex 1
Hex 2
Hex 3
Hex 4
Hex 5
Hex 6
Hex 7
Hex 8
Hex 9
Hex A
Hex B
Hex C
Hex D
Hex E
Hex F
Other Topics
User Information
Home Page
Scan Advisor
Identify specific Status indication
Power Bar
Identify specific Performance or Error indication
Troubleshooting
Identify Troubleshooting procedures